HARMAN KARDON DVD22
Manual de Usuario

SYSTEM SETUP
Scan Type: This setting allows you to select between progressive and interlaced scanning for the Component Video Outputs � to maximize the image resolution for the type of video display in use. When all desired setup and configuration entries have been made, press the OSD Button ` to return the player to normal operation and you are ready to enjoy the finest in DVD or CD playback! Note that the output at the S-Video � and Composite Video § outputs will always be standard-rate video that is compatible with any television set or video display. Two choices are available: � Progressive: Select this option if you have a video display that is compatible with input sources of 480P or greater. Displays labeled as �HDTV Ready,� including virtually all large-screen LCD and plasma displays, are compatible with progressive scan. � Interlaced: Select this option when you are using an older video display that has Y/Pr/Pb component inputs, but which is not capable of displaying high scan rate, or �HD� signals. Video Mode: This setting affects only the Component Video Outputs �, and it controls how the video signals are optimized for progressive scan display. In most cases, the �automatic� mode is your best choice, as it senses whether the disc being played was originally recorded on video or shot on film. However, in some cases you may wish to compensate for errors in the disc authoring that occur when the frame rate is not properly maintained when films are converted to video. Three choices are available: � Auto: This is the recommended setting, as it lets the DVD 22 analyze the signals from the DVD and adjust the output accordingly. � Movie: Choose this option for optimal playback of material that was shot on film, even though you are viewing it on video via a DVD. � Video: Choose this option for optimal playback of material that was shot directly to video, such as concerts and sports programming. Due to the nature of these settings, the navigation is somewhat different from the DVD 22�s other menus and controls. The menu itself is called up in the same way as the other menus. Press the OSD Button ` to activate the main menu screen, and then press the �¤ Navigation Buttons e so that SETUP is highlighted. Press the Enter Button z, and then use the �¤� � Navigation Buttons e until the VIDEO ADJUSTMENTS menu box (which contains an icon with slider controls and the word VIDEO, and is located at the bottom of the column in the Submenus Area �) is highlighted within a white outline. Then press the Enter Button z again. When you press Enter z the video adjustments will appear inside a black bar at the top of the screen, with either the video from a disc being played or the splash screen shown on the rest of the screen.

To change any of the video adjustments shown at the top of the screen, first press the �¤� � Navigation Buttons e so that the �+� to the right of a parameter name is highlighted to increase the setting or ��� to the right of a parameter name is highlighted to decrease the setting. Then press the Enter Button z to change the value as shown by the number of blue lines to the left or right of the center line. When only the dark center line is shown with no blue lines, the setting is at the midpoint default value. Changes to any of the settings may be made with a test disc playing, or you may use the internal test signal by pressing the �¤� � Navigation Buttons e until the word OFF is highlighted next to the TEST SCREEN line. To activate the test signal, press the Enter Button z and note that a special combination test signal, including both color bars and gray scale along with 100% black and white fields, will be displayed. To recall the video controls, press the OSD Button ` and then navigate among the settings and make any necessary changes following the steps in the previous paragraph.

Video Adjustments Menu
This menu allows you to adjust five key parameters of the video signal to compensate for differences between your DVD player and other video sources. You may use either the DVD 22�s built-in color bar test signal or a test disc as the standard for the adjustments. To ensure that your system is properly optimized, we strongly recommend that you adjust your video display using the display�s own controls before making any changes to the DVD 22�s output. Once the display is properly calibrated with all settings on the DVD 22 set to their midpoint, use the controls on this menu to fine-tune the DVD 22�s output.

20

SYSTEM SETUP